Photon Lens caps with 'iris' @ £24
- some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: Photon Lens caps with 'iris'
Payment sent. 
- some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: Photon Lens caps with 'iris'
Cheers Mark - expect them before 1PM on Tuesday.
Re: Photon Lens caps with 'iris' @ £24
Items received. Thanks.
-
graham 777
- Posts: 6
- Joined: 16 Jan 2014, 02:01
- Location: Tamworth
Re: Photon Lens caps with 'iris' @ £24
Hi Dave can you tell me how much for your iris and i.r. torch for the photon ?
regards Graham
regards Graham
- some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: Photon Lens caps with 'iris' @ £24
Hi Graham, assuming you refer to the budget IR conversion as suited to the Standard 5x42 Photon at subsonic ranges:graham 777 wrote:Hi Dave can you tell me how much for your iris and i.r. torch for the photon ?
regards Graham
The iris lens cap is £24
The IR is £24 too.
Total is £48 + £6 RMSD, in stock, can be posted tomorrow to receive next day before 1PM.
PP addy is: davidgeorge69@btinternet.com
Cheers my 'ansum.
- some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: Photon Lens caps with 'iris' @ £24
Bump:
I need to clear my PM's on an almost daily basis now chaps - so use my sales threads to order items now please.
I need to clear my PM's on an almost daily basis now chaps - so use my sales threads to order items now please.
Re: Photon Lens caps with 'iris' @ £24
I'm using mine with a doubler and its on my 17hmr taking rabbits out to 150 + the IR is a T20 would like to know if your lens cap will fit the doubler and what size iris 
- some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: Photon Lens caps with 'iris' @ £24
Hi Steve, The iris hole is usually about 1" for moderate amounts of IR being used.
I can vary the size to approximately mitigate the amount of excess IR the sensor is receiving according to how much excess IR you are throwing out in front of it - or if you are shooting very low ranges. I can offer them with smaller iris holes if the buyer indicates they are using loads of IR. I would suggest about 22mm ish for the T20 if it has an Oslon Black full power LED in it in single mode, being used at rimfire ranges.
I frequently get enquiries about using them with a doubler - but I have never used a doubler. I assume the outer diameter may be slightly different from the Photon outer diameter at the extreme end of the objective housing. Given the lens cap is a friction fit it is doubtful they will be usable for that purpose.
I also believe the doubler is equipped with it's own flip up lens cover that has an iris feature doing the same function - which partially accounts for its cost.
I can vary the size to approximately mitigate the amount of excess IR the sensor is receiving according to how much excess IR you are throwing out in front of it - or if you are shooting very low ranges. I can offer them with smaller iris holes if the buyer indicates they are using loads of IR. I would suggest about 22mm ish for the T20 if it has an Oslon Black full power LED in it in single mode, being used at rimfire ranges.
I frequently get enquiries about using them with a doubler - but I have never used a doubler. I assume the outer diameter may be slightly different from the Photon outer diameter at the extreme end of the objective housing. Given the lens cap is a friction fit it is doubtful they will be usable for that purpose.
I also believe the doubler is equipped with it's own flip up lens cover that has an iris feature doing the same function - which partially accounts for its cost.
















