Intro and hello

[Rammer]

Hi all
Quick intro great forum very interesting stuff
From East Yorkshire area been into shooting rabbiting working dogs all my life really,last four years more centre fire love me foxing like pottering and tinkering although not the best electrically but not bad with me hands going to try t20??!! build to start with I have no nightvision at present but hope to change this. Current set up scope mounted light force hand held culsion led lamp roof mounted light force . Thick first project red led for foxing rig thoughts please
Ps have account with RS comp. had a quick look got Oslon black s type but didn't have a clue which red led I wanted there's loads noticed some are pre wired which would help although keen to have a go , also spec of wire for these build solder types /thickness etc.
Thanks in advance

[some bloke]

Hi Rammer - would that be rammerburt off the PW?

[phoenix]

Rammer,
Hi, and welcome to the forum. If you want an oslon black from RS, then this is it
http://uk.rs-online.com/web/p/ir-leds/7 ... 424F544826
and this is the star it's soldered to
http://uk.rs-online.com/web/p/thermal-g ... 438341|acc
If you haven't done any reflow soldering before there are loads of videos on YouTube showing how to do it

Cheers

Bruce

[Rammer]

Hi Rammer - would that be rammerburt off the PW?

no

[Rammer]

Rammer,
Hi, and welcome to the forum. If you want an oslon black from RS, then this is it
http://uk.rs-online.com/web/p/ir-leds/7 ... 424F544826
and this is the star it's soldered to
http://uk.rs-online.com/web/p/thermal-g ... 438341|acc
If you haven't done any reflow soldering before there are loads of videos on YouTube showing how to do it

Cheers
got oslon black was after red and white biuld for foxing
regards lee

Bruce