Lens for watec

[thesmi]

Im after a lense with around a 4x mag or zoomable with manual zoom focus

Its to fit a watec 902h for a nv spotter

Cheers

[thesmi]

Sorted bought a stock optics one

[spiralviral]

Sorted bought a stock optics one

any link looking to do the same, thx

spiralviral

[thesmi]

I bought this item number 121144133501 off the bay

[spiralviral]

cheers, taking a look.

S

[thesmi]

By the way it screws on so i think you need a cs adapter or summin if you dont have one!! But im no expert

[Marky610]

That lens is a cs mount so wont need a spacer.

To remember it you have 'c' mount and 'cs' mount, 'cs' mount is 5mm nearer the lens therefore remember it as 'c short'

So when you fit a 'c' mount lens to a 'cs' mount camera you need a spacer.

[spiralviral]

That lens is a cs mount so wont need a spacer.

To remember it you have 'c' mount and 'cs' mount, 'cs' mount is 5mm nearer the lens therefore remember it as 'c short'

So when you fit a 'c' mount lens to a 'cs' mount camera you need a spacer.

Cheers Marky, is there any issue between the lens being suited for 1/3 ccd when the watec is a 1/2" ccd

S

[Marky610]

All it means is the focal length won't be true, as in if set to say 50mm it should give you a say 5deg field of view but you only get a 4deg field of view. Got it?

There used to be lots of sqabbils on here because I used 1/3" format lens on a 1/2" camera. Makes no difference works just as well.

[spiralviral]

Cheers Marky, understood, and as ever, your advice is very much appreciated. Will get ordering!

Steve