Mini OSD voltage level on your screen + timer !

[CustomRifleScopesUK]

Hi All,

I have a few Mini OSD's left over, surplus stock. Never been used.

They can read the voltage of your battery on screen, if you have two batteries they can read both, plus it has a built in timer.
In the photo I used 1 reading on the left that let me know when the unit will switch off as it goes down to 8v and the RHS i used
to let me know the constant VF-2C viewfinder voltage so I could monitor fluctuations that shouldn't happen, Great idea to keep
an eye on things

They are designed for multi copters but you can easily put them into your Night vision DIY build, if you want to see how good they are
then watch my EDNV video.

They are £14 each, plus P&P, you won't find cheaper in UK !

[img]http://i288.photobucket.com/albums ... .jpg[/img]

I can even help you with a schematic when you buy one

So PM me if your interested ?

Kind regards Spaltty

[jeffo]

how big are they and how easy are they to wire

[CustomRifleScopesUK]

how big are they and how easy are they to wire

They are 19 mm x 35 mm x 5mm

Hope the below info helps.......plus I will give you a schematic on how to wire it in, very easy !

Features:
It can check two voltages and overlap them onto the video signal. Factory calibration, its precision reaches +/- 0.1V
The background is light dark when the data is displaying in overlapping way, this can ensure customers read clearly and precisely under strong light environment or the light dark background.
40 position data modes are for choice. (We can change the mode numbers and the displaying position according to the request of our customer)
It can automatically record the last displaying position and won’t be lost even the power is off.
LED light will flash when no video signal is received
The device can be connected in series way monitoring more voltages, and overlapping several OSD module
Support NTSC and PAL

How to use:
After connect Mini OSD to your multicopter, choose a adquate place via setting button (there are 40 places for you to choose from).
Every 40 times click on T, it will be change between On mode and Off mode
Working hours will be displayed in the power since T ON mode, the off time T OFF mode display.
Input Voltage: 4.5V-12V
Lithium: 3s
Adds a Video connect port, facilitate wire connection.
Vin and Vout is symmetrical, it is interchageable use

Package size: 10 * 10 * 1 cm / 4 * 4 * 0.4 in
Package weight: 13 g / 0.4 oz