www.nightvisionforumuk.com

This is basically what I need Rolson donor torch , kd 74mm lens , olson + star, driver+dimmer( led-supply), dimmer knob, 2.1 dc plug/socket, ally pill for led. I don't know a lot about it but the parts need to be suitable for 12v

hi sheepy

you should have a read through this post by Bruce (phoenix) as regards the dimmer, also gives a list of parts http://nightvisionforumuk.com/viewtopic.php?f=31&t=2359

also an earlier post by Poppy that I think will help you http://nightvisionforumuk.com/viewtopic.php?f=31&t=3207

cheers jock

If your determined to build one, either use an xp driver or an led-supply one 1amp, as for the Rolson cheapest I found was £7 on the net , the lens comes from kaidomain 74mm, will need a little fettling to fit the bezel,as for the olson on a star unless your reflowing your own, would recommend Ian ( sikastag ) as his are top notch, then need to make a 34mm diam ally pill, There are other builds from 50mm to 78mm lenses,depends what your needs are! Might be easier to purchase one ready made from one of the guys on here and invest in a good camera and screen from the off,will save you money in the future! Still probably come in less than £200 pound this way and will still outperform the likes of a NS200 at 3-4 times the cost.

If one of you guys had one for sale that would be great is I'm new to nv it would have to have a external lead for power supply. Sadly already brought camera and screen
Camera
http://item.mobileweb.ebay.co.uk/viewit ... 1250694275
Monitor
http://item.mobileweb.ebay.co.uk/viewit ... 0813226557