HOME BUILT BULLET CAM DEDICATED NV RIFLE RIG.

This is for members to sell, buy or swap goods.
Post Reply
User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

HOME BUILT BULLET CAM DEDICATED NV RIFLE RIG.

Post by some bloke » 19 Jan 2021, 01:39

As some of the long term members on here know, the SURE24 imported KT&C low light CCD cameras are no longer being made and are now becoming sought after. This rig uses an EJ230 bullet camera with the same ability as the E700 Exview cameras but in a different layout.

A 50mm M12 thread F1.2 lens has a doubler pressed onto it, effectively it making it a 100mm F2.4 with a fixed zoom of about 6 to 7 mag. The extra fine M12 lens allows super fine focus precision a lot easier than coarse thread cams manage.

The bullet cam is located in a tube that is carried by weaver rail scope mounts that currently have a dovetail adaptor captively fitted into them that can be removed - so will fit weaver or dovetail rails.

I should declare the camera has some tiny dead pixels that don't overly affect the image due to the neutral density gel filter over the screen that minimises screen glare into dark adjusted eyes at night.

The basic option has a 5" 800x480 resolution monitor for those with their own illuminator at £250.
A compact zoom VCSEL laser illuminator can be included at £300.
A further option is the inclusion of a DVR recorder at £30. Prices are 'collected'

A video of how to form and adjust the crosshairs using the red OSD joystick at the rear of the camera:
https://youtu.be/a2J_lxlN5T4

A quick dawn bunny shot with no IR after the photo's:
https://youtu.be/_fTeX8hMFkY


Image

Image

Image

Image

More photos and editing might follow.

Post Reply