Foxing Spotter with 4 carriers.
Posted: 28 Sep 2015, 19:58
One only: Night Vision Spotter with a 105mm F1:2.8 SLR lens and 4 carriers to suit a wide range of uses. £240 + £10 RMSD or collect.
Don't even think of using this for subsonic ranges because the Field of View will be too tight - in favour of better long range quarry identification.
This one is almost exclusively for use overlooking a bait station while not needing to hold a near eye spotter to the eye.
These are offered with 4 swappable carrier options that screw into the brass tripod insert:
Tripod with extendable legs, can also be used as a handle.
Solid machined handle with a lanyard hole in it.
Lightforce/Deben remote handle adaptor.
Suction mount to fit to roof or window of truck - like these:
The spotter is powered by 2 18650 batteries - not supplied, and most NV users will already have a spare illuminator that can be fitted to it with a weaver based scope mount. That allows the illuminator to be shimmed or otherwise aimed high so the foreground is less likely to be washed out and the camera AGC can continue to see further rather than try to shutter out any excessive foreground light bloom.
The HD monitor has a brightness control, and has about 1 meter of cabling that allows it to be moved into a truck - or on the grass if laying up at a bait station. Shown here with a smaller 50mm lens for rabbiting ranges.
Or just shift the monitor on the grass if laying up at a bait station:
The 5" HD monitor forms the lid of the box - this is how it is removed: https://www.youtube.com/watch?v=rNOhhMY1UsE
Additional 1 meter extension cables can be supplied at £5 each.
Don't even think of using this for subsonic ranges because the Field of View will be too tight - in favour of better long range quarry identification.
This one is almost exclusively for use overlooking a bait station while not needing to hold a near eye spotter to the eye.
These are offered with 4 swappable carrier options that screw into the brass tripod insert:
Tripod with extendable legs, can also be used as a handle.
Solid machined handle with a lanyard hole in it.
Lightforce/Deben remote handle adaptor.
Suction mount to fit to roof or window of truck - like these:
The spotter is powered by 2 18650 batteries - not supplied, and most NV users will already have a spare illuminator that can be fitted to it with a weaver based scope mount. That allows the illuminator to be shimmed or otherwise aimed high so the foreground is less likely to be washed out and the camera AGC can continue to see further rather than try to shutter out any excessive foreground light bloom.
The HD monitor has a brightness control, and has about 1 meter of cabling that allows it to be moved into a truck - or on the grass if laying up at a bait station. Shown here with a smaller 50mm lens for rabbiting ranges.
Or just shift the monitor on the grass if laying up at a bait station:
The 5" HD monitor forms the lid of the box - this is how it is removed: https://www.youtube.com/watch?v=rNOhhMY1UsE
Additional 1 meter extension cables can be supplied at £5 each.
