Page 1 of 2

The zoom camera that went into the EDNV build

Posted: 19 Apr 2015, 17:42
by CustomRifleScopesUK
Hi guys,

I have a load more now, more than enough to sell some........£60 each free uk postage

This is the only digital zoom bullet camera that we currently know of that can hold zero at any magnification that in nearly as good as the ej230.

It's also a lot smaller at 19mm OD x 54mm length with external joystick. It's the one I put in the EDNV and has the best reticule designing menu, most shapes colours and transparency

[img]http://i288.photobucket.com/albums ... .jpg[/img]
[img]http://i288.photobucket.com/albums ... .png[/img]
D-effect is the zoom, it does go to around 10x magnification but it's best at 6x due to pixels looking too big
[img]http://i288.photobucket.com/albums ... .jpg[/img]
this image of the possible reticules / cross hair that you can design ( this one i wanted to look a little like the SUSAT) , notice the transparency so you can still see the target, this was in 2x zoom
mode on a 4x mag lens.

PM me if your interested

Kind regards Splatty

Re: The zoom camera that went into the EDNV build

Posted: 19 Apr 2015, 20:21
by rodp
How's the zoom function accessed, can it be left on zoom so quick and simple or do you have to go through menu etc?

Re: The zoom camera that went into the EDNV build

Posted: 19 Apr 2015, 21:25
by CustomRifleScopesUK
rodp wrote:How's the zoom function accessed, can it be left on zoom so quick and simple or do you have to go through menu etc?
You can leave it in the zoom section but it does have some writing around it, have a look at my video on my website, you will see it there.

The menu is more advanced than the e700/ej230 so when you have got the magnification how you want it you can save and exit in 1 scroll down and click save and it will exit. far better than having to go through all the menus to save then exit. very quick.

Hope this helps

Splatty

Re: The zoom camera that went into the EDNV build

Posted: 19 Apr 2015, 22:04
by sunndog
Is there a board cam version?

Re: The zoom camera that went into the EDNV build

Posted: 19 Apr 2015, 22:12
by CustomRifleScopesUK
sunndog wrote:Is there a board cam version?
Not that i know of, i will ask if you like?

Re: The zoom camera that went into the EDNV build

Posted: 19 Apr 2015, 22:25
by sunndog
Yeah please mate, a board version might be handy for a project

Re: The zoom camera that went into the EDNV build

Posted: 19 Apr 2015, 22:44
by CustomRifleScopesUK
sunndog wrote:Yeah please mate, a board version might be handy for a project
No problem i will look for one for you!

Re: The zoom camera that went into the EDNV build

Posted: 05 May 2015, 12:26
by gesroy
Interested in a zoom camera purchase .Can you tell me how to purchase.

Re: The zoom camera that went into the EDNV build

Posted: 05 May 2015, 13:22
by Radagast

Re: The zoom camera that went into the EDNV build

Posted: 07 May 2015, 07:11
by reaper1064
The pan and tilt option on this camera helps to fine tune the zero, a really flexible camera. :thumbup: