I have tried one of three Oslon deep red SSl LED's with a 1050mah driver and I'm not impressed with their brightness, although to be fair I shouldnt expect it to be as bright as a lower wavelength red.
Rather than just bin them all I fancy trying one with all four of the chips on the driver board - then bin them if still unsatisfactory.
If anyone has a surplus stock of the 4 chip drivers I'd like to buy one - or perhaps three as I might use them if the first result is all good. I can easily remove one chip if I don't need want more 1400mah ones.
17mm 1400 mah driver(s) wanted
-
some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: 17mm 1400 mah driver(s) wanted
found this site the other day. Different drivers may be of interest. Some other odds and sods also.
http://www.hoffmanamps.com/MyStore/perl ... D=!ORDERID!
http://www.hoffmanamps.com/MyStore/perl ... D=!ORDERID!
Re: 17mm 1400 mah driver(s) wanted
Good old El34 from the MTBR diy bike lights forum, eh?
Burt, your link doesn't work BTW as it points to your order page which is SSL so the rest of us can't see it.
Dave, I have a couple of the single mode 1400mah 4xAMC7135 drivers spare if you want 'em, but you might fry your LEDS if they're not fully heatsinked, so beware of that danger.
PM me if you're certain that's what you want to do.
Burt, your link doesn't work BTW as it points to your order page which is SSL so the rest of us can't see it.
Dave, I have a couple of the single mode 1400mah 4xAMC7135 drivers spare if you want 'em, but you might fry your LEDS if they're not fully heatsinked, so beware of that danger.
PM me if you're certain that's what you want to do.
-
some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: 17mm 1400 mah driver(s) wanted
PM sent my ansum.BT65 wrote:Good old El34 from the MTBR diy bike lights forum, eh?
Burt, your link doesn't work BTW as it points to your order page which is SSL so the rest of us can't see it.
Dave, I have a couple of the single mode 1400mah 4xAMC7135 drivers spare if you want 'em, but you might fry your LEDS if they're not fully heatsinked, so beware of that danger.
PM me if you're certain that's what you want to do.
Re: 17mm 1400 mah driver(s) wanted
BT65 wrote:Good old El34 from the MTBR diy bike lights forum, eh?
Burt, your link doesn't work BTW as it points to your order page which is SSL so the rest of us can't see it.
Dave, I have a couple of the single mode 1400mah 4xAMC7135 drivers spare if you want 'em, but you might fry your LEDS if they're not fully heatsinked, so beware of that danger.
PM me if you're certain that's what you want to do.
Your right mate, don't know me SSL`s from me BTW`s.
http://www.el34world.com/Misc/bike/BikesLights1.htm