Cz527 picatinny rail wanted

[dknowles]

Hi all , looking for a picatinny base for cz527 , must be at least 140mm to fit the wraith extended mount

[fizzbangwhallop]

One (or two) of AntSupplies expanding adapters may the way to go.....

https://www.ant-supplies.uk/rails-and-a ... pters.html

I use one of the long ones to get my Pard8 onto my AA S510 air rifle’s dovetail, it aligned better having the expansion gap on the right.

I already had a pair of the short, single slot, ones but I wasn’t convinced the measurement between the slot and the edge is the same as the slot to slot measurement of the longer one as the Pard’s arrestor block didn’t sit quite flat in there.

Cheers,

Fizz

[dknowles]

One (or two) of AntSupplies expanding adapters may the way to go.....

https://www.ant-supplies.uk/rails-and-a ... pters.html

I use one of the long ones to get my Pard8 onto my AA S510 air rifle’s dovetail, it aligned better having the expansion gap on the right.

I already had a pair of the short, single slot, ones but I wasn’t convinced the measurement between the slot and the edge is the same as the slot to slot measurement of the longer one as the Pard’s arrestor block didn’t sit quite flat in there.

Cheers,

Fizz

Cheers fizz , the ones I can see aren't long enough? This gun seems a nightmare to get the rails for as most are 100-130mm

[phoenix]

The spring loaded clip in picatinny adaptors won't work in a CZ527 because it has 15mm dovetails
This will do the job https://www.tacticalscope.co.uk/britann ... 6738-p.asp
As a CZ527 owner, I feel your pain!

Cheers

Bruce

[dknowles]

The spring loaded clip in picatinny adaptors won't work in a CZ527 because it has 15mm dovetails
This will do the job https://www.tacticalscope.co.uk/britann ... 6738-p.asp
As a CZ527 owner, I feel your pain!

Cheers

Bruce

Cheers Bruce , its a pain in the arse and they seem to be double the price of other rifles, for the wraith mount do you know the absolute minimum rail I can get , mm sporting have a standard which is 134mm?

[phoenix]

Agreed, rails for the CZ527 are expensive.
I use a Contessa on mine but I honestly don't know if it's long enough to work with the Wraith extended mount.

Cheers

Bruce

[dknowles]

Agreed, rails for the CZ527 are expensive.
I use a Contessa on mine but I honestly don't know if it's long enough to work with the Wraith extended mount.

Cheers

Bruce

Funnily enough I was just about to buy the same rail from someone , but it's 129mm and I think it's gonna be about 10mm short

[B&W FOX]

As I said on SD.
Get a pair of RB4 Sportsmatch CZ to 11mm dovetail blocks £27 and an extended 11mm to Weaver rail that is 260mm long on a 200mm base £18 all from Ant Supplies, job done.
I use one on my Trail 2 thermal and it repeats zero everytime.
You can swap it for forward or rearward overhang

[dknowles]

As I said on SD.
Get a pair of RB4 Sportsmatch CZ to 11mm dovetail blocks £27 and an extended 11mm to Weaver rail that is 260mm long on a 200mm base £18 all from Ant Supplies, job done.
I use one on my Trail 2 thermal and it repeats zero everytime.
You can swap it for forward or rearward overhang

Thanks mate , I have ordered one from Scott country that assures me will fit the extended mount but if not that'll be my plan