Pulsar N750 for sale

[kelba1946]

Having been seduced by Carl at the Shooting Show I am now the proud owner of a Drone Pro 10x so have an N750 surplus to requirements. I'm offering a full ready to go set up comprising:

N750 Digital night sight, De Pinto doubler fitted with a Sony 1.7 lens giving an effective magnification of 8.5 with an improved image, EPS3 external battery pack with charger, custom T20 illuminator with battery and charger. I have also fitted an additional weaver rail on top of the sight allowing top mounting of the illuminator which leaves the standard weaver rail available for mounting the EPS3. The unit also comes with the standard wireless remote and soft bag.

The set-up cost £1690 new, I am asking £1100 for the complete set up as described. All items are in virtually as new condition and simply need mounting and zeroing.

https:/www.dropbox.com/s/n70fqpe41ksbbqr/Pulsa ... 1.jpg?dl=0
https:/www.dropbox.com/s/bwfb32xhkje5o6v/Pulsa ... 2.jpg?dl=0
https://www.dropbox.com/s/rlyd1oebr0l7p ... 3.jpg?dl=0

Hope the above picture links work. Any questions please ask.

[kelba1946]

Messed up the first two links should be:

https://www.dropbox.com/s/n70fqpe41ksbb ... 1.jpg?dl=0
https://www.dropbox.com/s/bwfb32xhkje5o ... 2.jpg?dl=0

[thesmi]

Hi how did you mount the weaver to the top

[kelba1946]

Hi, I designed my own mount. The bracket is laser cut and powder coated and accepts a length of weaver rail riveted to it. To mount it the new weaver rail is sandwiched between the original rail and the body using slightly longer screws.

This link should lead to a photograph.

https://www.dropbox.com/s/2vk1tfg689cv0 ... l.jpg?dl=0

I have a spare which was a prototype, only difference is the paint finish, if you would like it pm your address and I'll put in the post. I made a batch of brackets but can't find them!