Quick hi

[Wayne.davison]

Hi I'm Wayne from north east. Joined as I'm building my second night vision for my air rifles and would like a better ir to see about 80-100y for spotting really.
I'm interested In air rifles and electronics but have a limited knowledge ATM and like to learn as I go.
Suppose i best go have a read lol.
Thanks

[22-250jock]

welcome to the forum Wayne

cheers jock

[michael40]

Hi Wayne and welcome to the forum.

Sounds like your be needing a t20 then .

Welcome and enjoy

Atb, mike

[sunndog]

welcome aboard fella

air rifle i.r you say?

http://nightvisionforumuk.com/viewtopic.php?f=31&t=1768

done.....

[Wayne.davison]

Hi thanks for the replies. I have a cree t6 at the minute with the standard white cree bulb. Is it possible to replace the star with a oslon black ir star. The ones I've seen on the net look like they'll fit but I don't know if it'll work. I like the idea of having the 3 different modes (high,med,low) so am thinking of leaving the driver board in and ignoring the strobe and SOS.
Does this seem do able? The trick is a great size for my rifle and has a zoom function.

I have a Sony 1/3 cctv camera board with a 16mm lens connected to a 3.5" LCD.

Thanks.

[Sonofscotland]

hi lee iam sure the lads on here will have you sorted out in no time with some good ir..welcome to the forum mate

[sunndog]

Hi thanks for the replies. I have a cree t6 at the minute with the standard white cree bulb. Is it possible to replace the star with a oslon black ir star. The ones I've seen on the net look like they'll fit but I don't know if it'll work. I like the idea of having the 3 different modes (high,med,low) so am thinking of leaving the driver board in and ignoring the strobe and SOS.
Does this seem do able? The trick is a great size for my rifle and has a zoom function.

I have a Sony 1/3 cctv camera board with a 16mm lens connected to a 3.5" LCD.

Thanks.

if its the t6 i think it is. i tried it ages ago.....it werent great mate

the t20 on the other hand is conan's coconuts

[Wayne.davison]

Hi thanks for the replies. I have a cree t6 at the minute with the standard white cree bulb. Is it possible to replace the star with a oslon black ir star. The ones I've seen on the net look like they'll fit but I don't know if it'll work. I like the idea of having the 3 different modes (high,med,low) so am thinking of leaving the driver board in and ignoring the strobe and SOS.
Does this seem do able? The trick is a great size for my rifle and has a zoom function.

I have a Sony 1/3 cctv camera board with a 16mm lens connected to a 3.5" LCD.

Thanks.

if its the t6 i think it is. i tried it ages ago.....it werent great mate

the t20 on the other hand is conan's coconuts

thanks mate. how far could you see? im not looking for mega distance. i shoot between 30-50y but would like a bit for spotting like i said in my op. cheers

[sunndog]

i'v not used your cam so i can't say for sure mate but 100yrds minimum shootable distance. spotting obviously further

i used to use one for all my rabbiting on air rifle, .22lr and hmr. its all you need for bunny's

[Wayne.davison]

thanks for that what torch was that with the t6 or the t20? id love a t20 but funds just dont allow at the minute