Metal detecting

A place to introduce yourself, chat about anything and put forward suggestions.
Instructions on how to add your location and photographs.
User avatar
gypo
Posts: 1824
Joined: 10 Apr 2014, 16:36
Location: wales

Re: Metal detecting

Post by gypo » 01 Nov 2014, 18:52

Image
Image
Raised ridges
Image
The back of it

User avatar
rodp
NON EMMET
Posts: 4159
Joined: 09 Mar 2012, 22:49
Location: The Black Country

Re: Metal detecting

Post by rodp » 01 Nov 2014, 21:54

You need to clean it up a bit and have a better look, and post another pic :thumbup: Soapy water and a soft brush or ultrasonic cleaner.
Try googling cleaning lead finds :thumbup:
"Land Rover, the worlds best 4x4 by far"

"Argo, a great 8x8"

User avatar
rodp
NON EMMET
Posts: 4159
Joined: 09 Mar 2012, 22:49
Location: The Black Country

Re: Metal detecting

Post by rodp » 01 Nov 2014, 22:00

Here you go

Bronze, Copper, Brass, Lead and Pewter:
Wash and clean in warm soapy water, use an old stiff toothbrush to get as much dirt off as possible. If really stubborn dirt cannot be removed after brushing, leave the items to soak in a plastic container filled with household paraffin. Remove the item from the paraffin from time to time and brush with the toothbrush to get into small crevices and lettering in coin legends. However, be very careful not to scratch too hard and end up marking the metal or any patina that is present.


When it's clean see if there's what appears to be a hole in the edge each side, may be a bag / cord seal. I've got one of those somewhere in the garage :thumbup:
"Land Rover, the worlds best 4x4 by far"

"Argo, a great 8x8"

User avatar
rodp
NON EMMET
Posts: 4159
Joined: 09 Mar 2012, 22:49
Location: The Black Country

Re: Metal detecting

Post by rodp » 01 Nov 2014, 22:07

Here you go

Bronze, Copper, Brass, Lead and Pewter:
Wash and clean in warm soapy water, use an old stiff toothbrush to get as much dirt off as possible. If really stubborn dirt cannot be removed after brushing, leave the items to soak in a plastic container filled with household paraffin. Remove the item from the paraffin from time to time and brush with the toothbrush to get into small crevices and lettering in coin legends. However, be very careful not to scratch too hard and end up marking the metal or any patina that is present.


When it's clean see if there's what appears to be a hole in the edge each side, may be a bag / cord seal. I've got one of those somewhere in the garage :thumbup:
"Land Rover, the worlds best 4x4 by far"

"Argo, a great 8x8"

User avatar
gypo
Posts: 1824
Joined: 10 Apr 2014, 16:36
Location: wales

Re: Metal detecting

Post by gypo » 02 Nov 2014, 15:40

Looks like I will be getting one of these pointers,http://www.detectorbits.co.uk/?p=1488
Ive done a bit of research and they seem to have nothing but good reviews, plus a free lanyard and holder :thumbup:
review here comparing the Garrett, Xpointer and the Whites TRX:https://www.youtube.com/watch?v=1tpCnMKhEiM
G

PESCA

Re: Metal detecting

Post by PESCA » 02 Nov 2014, 15:45

I'll have to get one of you fellas up here.

I know roughly where I lost a sixpence back in 1967. Been looking for it ever since :cry:

George

User avatar
gypo
Posts: 1824
Joined: 10 Apr 2014, 16:36
Location: wales

Re: Metal detecting

Post by gypo » 02 Nov 2014, 16:37

PESCA wrote:I'll have to get one of you fellas up here.

I know roughly where I lost a sixpence back in 1967. Been looking for it ever since :cry:

George
You know it's 50/50 if we find it George!
G

PESCA

Re: Metal detecting

Post by PESCA » 02 Nov 2014, 17:11

gypo wrote:
PESCA wrote:I'll have to get one of you fellas up here.

I know roughly where I lost a sixpence back in 1967. Been looking for it ever since :cry:

George
You know it's 50/50 if we find it George!
G
:(

George

User avatar
gypo
Posts: 1824
Joined: 10 Apr 2014, 16:36
Location: wales

Re: Metal detecting

Post by gypo » 02 Nov 2014, 17:19

Ok because it's you 75:25 :)
G

PESCA

Re: Metal detecting

Post by PESCA » 02 Nov 2014, 17:27

Okay mate.

That'll be 0.625 new pence I owe you :thumbup:

George

Post Reply