Clever person needed, dumb asses need not apply

Gloop · Post by **Gloop** » 18 Jun 2013, 22:36

Or 2.64 as above.

rodp · Post by **rodp** » 18 Jun 2013, 22:48

OK men, are we settled on 2.64" ? It seems to be correct to me and to be honest I never thought to work it out as a triangle

I blame age

And as a matter of interest Bruce, to start with I did just as you did and forgot about the arc

Thanks guys for all the input,................. hi ho, hi ho, a drilling I shall go.

If the wheels fall off I shall blame all of you

chas · Post by **chas** » 18 Jun 2013, 22:55

Might be a safer bet Rod to forget the holes and just weld it on

Gloop · Post by **Gloop** » 18 Jun 2013, 23:07

Or get a professional who has done a full risk assessment and comes with fire crew and ambulance in case it goes wrong.

rodp · Post by **rodp** » 19 Jun 2013, 06:36

Easier to just get a sucker to test it

" 'Ere yar buddy, go and thrash that, you'll be perfectly safe"

Can't see it being a problem really, there's another 7 wheels to hold it up

Radagast · Post by **Radagast** » 19 Jun 2013, 07:15

Gloop, never trust professionals. I used to turn up with a fully equipped ambulance at Motocross tracks in exchange for a steak sandwich and a can of coke. Even got the thing airborne over one of the jumps... hmmm.. maybe I need not apply...

rodp · Post by **rodp** » 19 Jun 2013, 16:51

Radagast wrote:Gloop, never trust professionals. I used to turn up with a fully equipped ambulance at Motocross tracks in exchange for a steak sandwich and a can of coke. Even got the thing airborne over one of the jumps... hmmm.. maybe I need not apply...

Some folk are just cheap

rodp · Post by **rodp** » 19 Jun 2013, 16:55

Well, it all seemed to work out, set the callipers to required measurement, marked off around the pcd and had to adjust the callipers by a gnats kna**er on the little wheel thingy.

So, marked and drilled now, all done apart from welding them in the wheels

Cheers men

.

Post by **sunndog** » 19 Jun 2013, 20:57

rodp wrote:Easier to just get a sucker to test it " 'Ere yar buddy, go and thrash that, you'll be perfectly safe"

at last.......my time to shine LMAO

rodp · Post by **rodp** » 19 Jun 2013, 21:43

sunndog wrote:
rodp wrote:Easier to just get a sucker to test it " 'Ere yar buddy, go and thrash that, you'll be perfectly safe"
at last.......my time to shine LMAO

Everyone should have their 15 minutes of fame . But as the ad says,.............this could be 15 minutes of pain

Don't worry, I wouldn't laugh

www.nightvisionforumuk.com

Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply

Re: Clever person needed, dumb asses need not apply