Hi from a Gen1 user
-
Bladerunnertoo
- Posts: 6
- Joined: 15 Feb 2014, 19:19
- Location: United Kingdom notts area
Hi from a Gen1 user
A quick Hello, My real nane is Rob,which i dont mind people knowing or using,As in the Title i have a Gen 1 ,Don`t laugh it suits me fine,
Must say this seems the place to learn the do it yourself N/Vs, I will be honest an state here an now a lot of the tech stuff will go over my head , for now anyway,
Right off to look around ,Cheers All
- 22-250jock
- Posts: 2437
- Joined: 07 Dec 2012, 17:53
- Location: west sussex
Re: Hi from a Gen1 user
welcome aboard Rob,
nowt wrong with gen1 mate, we all started somewhere,...................but..............there's lots of diy builds on here that will out perform it for a lot less money
have a read in the DIY section, plenty of good advice, and if you get stuck or need a bit of info, just shout..........some one will be along to help
be warned though.................you will become addicted
cheers jock
nowt wrong with gen1 mate, we all started somewhere,...................but..............there's lots of diy builds on here that will out perform it for a lot less money
have a read in the DIY section, plenty of good advice, and if you get stuck or need a bit of info, just shout..........some one will be along to help
be warned though.................you will become addicted
cheers jock
“When guns are outlawed, only the Government will have guns. The Government - and a few outlaws. If that happens, you can count me among the outlaws.”
― Edward Abbey,
― Edward Abbey,
-
PESCA
Re: Hi from a Gen1 user
Hello Rob and welcome along.
No shame in having a GEN1 unit mate. Lots of fellas out there using them to good effect and I'm pretty sure we've all owned one at some point.
George
No shame in having a GEN1 unit mate. Lots of fellas out there using them to good effect and I'm pretty sure we've all owned one at some point.
George
-
Bladerunnertoo
- Posts: 6
- Joined: 15 Feb 2014, 19:19
- Location: United Kingdom notts area
Re: Hi from a Gen1 user
Thanks Chaps, Yes your quite right with the (build) section, that is my intention at some point, and i am quite sure you lads will be more than happy to keep me on the right path , 
-
Dave goodall
- Posts: 36
- Joined: 12 Jul 2012, 04:39
- Location: Calderdale
Re: Hi from a Gen1 user
Hi rob mate your gen 1 is a good unit mate with the good ir
as tubed gen 1 goes deo the best units in my eyes nice to see u here ate be good to catch up
BULLPUP MAD FORUM http://s15.zetaboards.com/BULLPUP_MAD/index/
-
Bladerunnertoo
- Posts: 6
- Joined: 15 Feb 2014, 19:19
- Location: United Kingdom notts area
Re: Hi from a Gen1 user
Cheers Dave, Good to here from you mate, will be good to catch up.Dave goodall wrote:Hi rob mate your gen 1 is a good unit mate with the good iras tubed gen 1 goes deo the best units in my eyes nice to see u here ate be good to catch up
- some bloke
- NON EMMET
- Posts: 9501
- Joined: 27 Jan 2012, 16:14
- Location: Leicester mostly but DEEP S.West sometimes
Re: Hi from a Gen1 user
Hi Rob, most of us are closet ex gen1'rs mate.
- AirRifleSport
- Posts: 1529
- Joined: 04 Dec 2012, 16:32
- Location: Oxfordshire
Re: Hi from a Gen1 user
Hi Rob, welcome to the forum
I also use a GEN 1+ nomocular, as I use an air rifle and sit down, I find the GEN 1+ useful to spot for up to 60 yards. It saves me using the screen from my NV setup on the scope, this way there is no light bouncing in my face and give my position away to the quarry... Well, until I am ready to shoot that is. I am considering making another digital setup with a near eye display to replace the GEN 1+
I also use a GEN 1+ nomocular, as I use an air rifle and sit down, I find the GEN 1+ useful to spot for up to 60 yards. It saves me using the screen from my NV setup on the scope, this way there is no light bouncing in my face and give my position away to the quarry... Well, until I am ready to shoot that is. I am considering making another digital setup with a near eye display to replace the GEN 1+
...the doctor said that I need to do gentle exercise... I said to him that I already did... trigger squeezing!
















