Flashlights, IR illuminators. Projects, reviews and queries. DIY 'stickies' here too.
- Posts: 854
- Joined: 16 Sep 2013, 15:14
- Location: Dewsbury
eddieh wrote: ↑
16 Sep 2018, 12:53
Hi once you have decided on the power you want on the black sunranger ruby how do you lock the memory so its on that power when you turn it back on...?
"PROVIDING" its a 3 mode with memory one, select the power level required by half pressing the switch, then leave it on that setting for around 5 seconds then turn off by a solid press of the switch this will then remember the setting and come back on next time you fully press the switch, if you half press it, it will change modes again (only half press when you want to change modes)
- Posts: 14
- Joined: 24 Sep 2015, 19:27
- Location: south wales
Thank you for your reply, it is a 3 power mode one ill try what you have suggested