Adjustable torch mount wanted
-
- Posts: 9
- Joined: 26 May 2014, 21:10
- Location: Northern Ireland
Adjustable torch mount wanted
Looking for something like the Nightforce adjustable mount, needs to be 30 mm ring.
Re: Adjustable torch mount wanted
Bought a couple of these, they are so much better than the ebray poo that I had before.
http://www.microglobe.co.uk/laserluchs- ... -9358.html
http://www.microglobe.co.uk/laserluchs- ... -9358.html
Re: Adjustable torch mount wanted
That looks wonderful. Unfortunately, it also looks like it is 25mm.
Re: Adjustable torch mount wanted
Could try these
http://m.uttings.co.uk/p125016-burris-1 ... er-mounts/
2 for the price of one of the above, they come in 30mm too. I use them with the offset inserts on my long range rifle to gain 12mins of elevation. They swivel like the sako scope mounts.
Skany at ludicrous lumens sells a similar but extended QD 3D printed torch mount for a fraction of cost. I have one, it's brilliant. It enables my T67 to easily clear a 50mm scope.
https://www.ludicrous-lumens.co.uk/coll ... ball-mount
Sent from my iPhone using Tapatalk
http://m.uttings.co.uk/p125016-burris-1 ... er-mounts/
2 for the price of one of the above, they come in 30mm too. I use them with the offset inserts on my long range rifle to gain 12mins of elevation. They swivel like the sako scope mounts.
Skany at ludicrous lumens sells a similar but extended QD 3D printed torch mount for a fraction of cost. I have one, it's brilliant. It enables my T67 to easily clear a 50mm scope.
https://www.ludicrous-lumens.co.uk/coll ... ball-mount
Sent from my iPhone using Tapatalk
Re: Adjustable torch mount wanted
Sorry, they are 25mm. Seems I'm a bit of a twit.Clunge wrote:That looks wonderful. Unfortunately, it also looks like it is 25mm.
-
- Posts: 9
- Joined: 26 May 2014, 21:10
- Location: Northern Ireland
Re: Adjustable torch mount wanted
That fig 8 device looks the job. Any idea if it will fit a 30 mm scope and torch body?oaken8 wrote:Could try these
http://m.uttings.co.uk/p125016-burris-1 ... er-mounts/
2 for the price of one of the above, they come in 30mm too. I use them with the offset inserts on my long range rifle to gain 12mins of elevation. They swivel like the sako scope mounts.
Skany at ludicrous lumens sells a similar but extended QD 3D printed torch mount for a fraction of cost. I have one, it's brilliant. It enables my T67 to easily clear a 50mm scope.
https://www.ludicrous-lumens.co.uk/coll ... ball-mount
Sent from my iPhone using Tapatalk
Re: Adjustable torch mount wanted
The scope fitting has a removable spacer making it either 25 or 30. The swivelling torch end on mine fits a t67 which is 25. Give Ludicrous a call, I am sure he would make you one if he doesn't list a 30.
Sent from my iPhone using Tapatalk
Sent from my iPhone using Tapatalk
- Midnight.Sun
- Posts: 316
- Joined: 08 Nov 2015, 01:49
- Location: Syria
Re: Adjustable torch mount wanted
Those Burris Signature rings obviously works best for what they were designed for, which is centring the scope in the best way possible and not leaving any scratch marks on them throughout the weather temperatures changes. But I don't think that they will do what the Laserluchs rings are originally designed to, which is excessively adjusting heavy torches and lasers. To my eyes -looking at both designs- I think the Laserluchs allow wider and easier torch movement, while in the Signature's case you'll have to rotate the torch while adjusting because the offset inserts are thin/thick two parts, so can't move freely as can Laserluchs inserts, unless the Luchs inserts two parts are also offset, but I don't think so. This video shows how the Luchs works, can the Signatures do the same job?
https://youtu.be/KvJJdS1KI5A
And does the three sizes of offset pos-align inserts (0.005 / 0.010 / 0.020) all come with every Burris Signature set, or have to be bought separately?
https://youtu.be/KvJJdS1KI5A
And does the three sizes of offset pos-align inserts (0.005 / 0.010 / 0.020) all come with every Burris Signature set, or have to be bought separately?
- Midnight.Sun
- Posts: 316
- Joined: 08 Nov 2015, 01:49
- Location: Syria
Re: Adjustable torch mount wanted
They make 30mm as well.morrisman wrote:Sorry, they are 25mm. Seems I'm a bit of a twit.Clunge wrote:That looks wonderful. Unfortunately, it also looks like it is 25mm.
Re: Adjustable torch mount wanted
The Burris rings work just fine as torch mounts, no problem with adjustment or holding zero
The main problem with them is that they attach using an allen key and hence are a PITA to get on and off, especially if you have to remove the torch every time you put the rifle in the cabinet.
The best torch mount I have used is an Optilock ring mounted on a QR base which is perfect but not cheap.
The main problem with them is that they attach using an allen key and hence are a PITA to get on and off, especially if you have to remove the torch every time you put the rifle in the cabinet.
The best torch mount I have used is an Optilock ring mounted on a QR base which is perfect but not cheap.