QwikFit Add On rigs.

This is for members to sell, buy or swap goods.
User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by some bloke » 01 May 2017, 16:42

Farmer wrote:Do you take paypal ?
Yes mate - Private message sent.

Dobbo78
Posts: 2
Joined: 05 Nov 2016, 14:37
Location: Durham

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by Dobbo78 » 10 Aug 2017, 17:44

Would this set up fit a hawke eclipse?

Thanks

Alex

User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by some bloke » 11 Aug 2017, 01:20

Dobbo78 wrote:Would this set up fit a hawke eclipse?

Thanks

Alex
It should fit if yours doesn't have an IR module on the eyebell, assuming the eyebell diameter is the same as most other recent Hawke's at 43mm.

If it does have one I very much doubt it will slide on fully.

mr_magicfingers
Posts: 20
Joined: 24 Oct 2013, 04:32
Location: DEVON

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by mr_magicfingers » 13 Aug 2017, 20:19

Have sent pm about possible purchase.

Haroon.Shaukat
Posts: 7
Joined: 14 Aug 2017, 07:41
Location: West midlands

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by Haroon.Shaukat » 27 Aug 2017, 09:57

Hi do you sell the bit that just goes on to the scope front which holds the camera, collet chuck?

Also how does the button which controls the modes work?

Thank you

User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by some bloke » 27 Aug 2017, 10:34

Haroon.Shaukat wrote:Hi do you sell the bit that just goes on to the scope front which holds the camera, collet chuck?

Also how does the button which controls the modes work?

Thank you
Sorry - I am currently very short of them and need to retain the remaining one's for my own builds.

User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by some bloke » 27 Aug 2017, 10:36

Double post.
Last edited by some bloke on 20 Dec 2017, 18:25, edited 1 time in total.

Haroon.Shaukat
Posts: 7
Joined: 14 Aug 2017, 07:41
Location: West midlands

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by Haroon.Shaukat » 27 Aug 2017, 14:32

No worries, do you make them yourself?

Love your build and I'm thinking of purchasing one! It is very neat and compact.

And sorry to ask about the mode switch again but I've asked the question in another section of the forum but no one has replied.

How does it work? I know half push will change the mode but how exactly? Does half a push stop power to PIL driver for just long enough so that when it comes back on it goes on to next mode? And if it stays on that mode for long enough then it will come back on to same mode as it was on before being switched off?

User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by some bloke » 27 Aug 2017, 18:04

Haroon.Shaukat wrote:No worries, do you make them yourself?

Love your build and I'm thinking of purchasing one! It is very neat and compact.

And sorry to ask about the mode switch again but I've asked the question in another section of the forum but no one has replied.

How does it work? I know half push will change the mode but how exactly?

Does half a push stop power to PIL driver for just long enough so that when it comes back on it goes on to next mode?

And if it stays on that mode for long enough then it will come back on to same mode as it was on before being switched off?
Correct - same as the lo/med/high modes in torches.

Yes, memory mode exists after three seconds.

I have the scope adaptors custom made in small batches to my requirements - as are the 5" monitor boxes, lens adaptors etc.

General information: I busy myself with other things during the summer when there is little demand for night vision and I carry less camera's etc: So please expect a turn around of about 7~10 days after payment received for a few more weeks yet.

Nightowl
Posts: 238
Joined: 29 Jan 2012, 12:23
Location: Chelmsford Essex

Re: KwikFit Add On Night Vision rigs - reduced prices for 2017

Post by Nightowl » 24 Sep 2017, 20:20

Hi Dave ,i would like to order a Kwikfit Evo with a T50ir pill price--£260-00
atb brian
please send payment details for bank transfer

Post Reply