Steerable C mount E700 camera lens adaptors.

This is for members to sell, buy or swap goods.
Post Reply
User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Steerable C mount E700 camera lens adaptors.

Post by some bloke » 03 Nov 2016, 16:13

New in are these Steerable C mount lens adaptors for spotter builders using CINE TV lenses here:
https://www.ebay.co.uk/sch/i.html?_from ... s&_sacat=0

These are broadly similar to the older type - apart from they are now supplied with longer screws slightly further apart so they can be 'AIMED' with the E700 camera fitted in position, a longer inside flange and a thin O-ring round the neck:

They can be fitted flush to a panel/box without the O-ring, or:

If used with the O-ring on the rear flange they can be screwed up to the O-ring - then further tighten required screw(s) to tilt the camera and lens towards a floppy head torch IR beam centre with a slight pivot action afforded by compressing one side of the O-ring. That of course leaves a slightly uneven gap around the edges of the lens mount, but the O-ring seals the joint.

16mm KPC E700 camera's will need their neck cropping by about half so it doesn't foul the inner barrel of the lens getting close enough to the camera sensor to achieve infinity focus 12mm E700 cams maybe short enough already but its a good idea to trim them back a little too, so that the metal neck is deeper or level with the inner base of the adaptor.

You will use the remaining part of the neck as an alignment guide to tack the camera body to the rear of the adaptor and inside of the box using glue or silicone sealant left overnight to cure, so do not remove all of the neck. There is little or stress or risk of a strike to the camera in a box so a little silicone will stick it in like shit does to a blanket - but a clear effort to remove it will be possible. :angel:


Price is £18 collected or add £7 for RMSD to UK postcodes.
Attachments
C mount to e700 adaptor (5).JPG
C mount to e700 adaptor (4).JPG
C mount to e700 adaptor (2).jpg
Last edited by some bloke on 24 Feb 2020, 17:46, edited 12 times in total.

magman
Posts: 65
Joined: 07 Jun 2014, 22:20
Location: Cheshire

Re: Steerable C mount E700 camera lens adaptors.

Post by magman » 11 Nov 2016, 08:18

I'll take one of those. If you could pm me the payment details that would be great.

User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: Steerable C mount E700 camera lens adaptors.

Post by some bloke » 23 Feb 2017, 17:03

I can't recall who is who is waiting for these but they are now back in stock.

pete65
Posts: 19
Joined: 19 Jan 2017, 15:11
Location: Southampton

Re: Steerable C mount E700 camera lens adaptors.

Post by pete65 » 27 Feb 2017, 10:33

I'll take on please if you pm me the details. Cheers


Sent from my iPhone using Tapatalk

koiman97
Posts: 296
Joined: 23 Oct 2012, 21:13
Location: Oldham manchester

Re: Steerable C mount E700 camera lens adaptors.

Post by koiman97 » 13 Jun 2017, 01:06

Hi can you pm me detaisl for payment for a adapter plz
Chris riley

User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: Steerable C mount E700 camera lens adaptors.

Post by some bloke » 07 Dec 2017, 04:46

I have another small batch of these in stock.

danny50
Posts: 18
Joined: 13 Jan 2013, 21:47
Location: norfolk

Re: Steerable C mount E700 camera lens adaptors.

Post by danny50 » 07 Dec 2017, 20:44

Hi some like,can I purchase one of these adaptors please and could I possibly have fitting instructions via pm as this is my first build

User avatar
some bloke
NON EMMET
Posts: 9432
Joined: 27 Jan 2012, 16:14
Location: Leicester mostly but DEEP S.West sometimes

Re: Steerable C mount E700 camera lens adaptors.

Post by some bloke » 24 Feb 2020, 17:14

ggggg
Last edited by some bloke on 01 May 2020, 20:27, edited 1 time in total.

Post Reply