The zoom camera that went into the EDNV build

This is for members to sell, buy or swap goods.
CustomRifleScopesUK

The zoom camera that went into the EDNV build

Post by CustomRifleScopesUK » 19 Apr 2015, 17:42

Hi guys,

I have a load more now, more than enough to sell some........£60 each free uk postage

This is the only digital zoom bullet camera that we currently know of that can hold zero at any magnification that in nearly as good as the ej230.

It's also a lot smaller at 19mm OD x 54mm length with external joystick. It's the one I put in the EDNV and has the best reticule designing menu, most shapes colours and transparency

[img]http://i288.photobucket.com/albums ... .jpg[/img]
[img]http://i288.photobucket.com/albums ... .png[/img]
D-effect is the zoom, it does go to around 10x magnification but it's best at 6x due to pixels looking too big
[img]http://i288.photobucket.com/albums ... .jpg[/img]
this image of the possible reticules / cross hair that you can design ( this one i wanted to look a little like the SUSAT) , notice the transparency so you can still see the target, this was in 2x zoom
mode on a 4x mag lens.

PM me if your interested

Kind regards Splatty
Last edited by CustomRifleScopesUK on 05 May 2015, 16:12, edited 1 time in total.

User avatar
rodp
NON EMMET
Posts: 4159
Joined: 09 Mar 2012, 22:49
Location: The Black Country

Re: The zoom camera that went into the EDNV build

Post by rodp » 19 Apr 2015, 20:21

How's the zoom function accessed, can it be left on zoom so quick and simple or do you have to go through menu etc?
"Land Rover, the worlds best 4x4 by far"

"Argo, a great 8x8"

CustomRifleScopesUK

Re: The zoom camera that went into the EDNV build

Post by CustomRifleScopesUK » 19 Apr 2015, 21:25

rodp wrote:How's the zoom function accessed, can it be left on zoom so quick and simple or do you have to go through menu etc?
You can leave it in the zoom section but it does have some writing around it, have a look at my video on my website, you will see it there.

The menu is more advanced than the e700/ej230 so when you have got the magnification how you want it you can save and exit in 1 scroll down and click save and it will exit. far better than having to go through all the menus to save then exit. very quick.

Hope this helps

Splatty

User avatar
sunndog
ADMINISTRATOR
Posts: 7339
Joined: 10 Jun 2012, 17:51
Location: buxton, derbyshire

Re: The zoom camera that went into the EDNV build

Post by sunndog » 19 Apr 2015, 22:04

Is there a board cam version?
Thermal hunting forum

https://thermalhuntingforum.com/

CustomRifleScopesUK

Re: The zoom camera that went into the EDNV build

Post by CustomRifleScopesUK » 19 Apr 2015, 22:12

sunndog wrote:Is there a board cam version?
Not that i know of, i will ask if you like?

User avatar
sunndog
ADMINISTRATOR
Posts: 7339
Joined: 10 Jun 2012, 17:51
Location: buxton, derbyshire

Re: The zoom camera that went into the EDNV build

Post by sunndog » 19 Apr 2015, 22:25

Yeah please mate, a board version might be handy for a project
Thermal hunting forum

https://thermalhuntingforum.com/

CustomRifleScopesUK

Re: The zoom camera that went into the EDNV build

Post by CustomRifleScopesUK » 19 Apr 2015, 22:44

sunndog wrote:Yeah please mate, a board version might be handy for a project
No problem i will look for one for you!

gesroy
Posts: 3
Joined: 16 Jan 2015, 13:47
Location: Lincolnshire

Re: The zoom camera that went into the EDNV build

Post by gesroy » 05 May 2015, 12:26

Interested in a zoom camera purchase .Can you tell me how to purchase.


reaper1064
Posts: 226
Joined: 23 Mar 2013, 22:32
Location: Castle Donington

Re: The zoom camera that went into the EDNV build

Post by reaper1064 » 07 May 2015, 07:11

The pan and tilt option on this camera helps to fine tune the zero, a really flexible camera. :thumbup:

Post Reply