Hi Guys,
I have made a breakthrough it getting every thing into one vf-c2
It is now tested on a .308 calibre rifle for recoil and vibration with the potting compound ( not even a flicker )
Your VF-C2 will forever be protected from spikes and the weather !
I have managed to install with it the 5v regulator that will protect it and allow for up to 42v input
I have also installed the voltage On screen display with timer and signal loss indicator
This also comes with a rotary pot switch that you can mount where you want, it dims the brightness of the screen and turns the unit on/off
All these extras plus my work including VF-C2 = £165 +P&P
Oh and before i forget, you get a free schematic on how to wire it in with the rotary switch as well
[img]http://i288.photobucket.com/albums ... .jpg[/img]
The OSD you will see when looking through the viewfinder, never get caught out with no battery power again, also has built in timer !
[img]http://i288.photobucket.com/albums ... .jpg[/img]
Let me know if you want one made for your build !
Kind regards Splatty